Allied Telesis At 8000s User Manual

Allied Telesis AT-8000S User Name. Initial Configuration, User Name.

Download 48 pages, 2.23 Mb
Success! {{ $ctrl.successMessage }}
0'>Errors!
>

Initial Configuration

Page 35
100.1.1.254 is the IP address of the default gateway that is used to reach the management network
To check the configuration, enter the command “show ip interface” as illustrated in the following example.
User Name
A user name is used to manage the device remotely, for example through SSH, Telnet, or the Web interface. To
gain complete administrative (super-user) control over the device, the highest privilege (15) must be specified.
Only an administrator (super-user) with the highest privilege level (15) is allowed to manage the device
For more information about the privilege level, see the CLI Reference Guide.
Allied Telesis At 8000s User Manual
The configured user name is entered as a login name for remote management sessions. To configure the user
name “bob” and privilege level of 15, enter the command at the system prompt as shown in the configuration
Console#
Gateway IP AddressActivity StatusType
----------------------------- ---------------- ---------
IP AddressI/FType

Allied Telesis At 8000s User Manual Instructions

----------------------------- ---------------- ---------
Console>
Console#

Allied Telesis Pay

Console(config)#
lee

Allied Telesis At-8000s 48 Manual

15