SCHILLER was the first manufacturer to combine the. Patient data (name, age, height, weight), user identification - Listing of all recording conditions (date, time, last calibration) - Flow-volume or volume-time curve. 1 operating manual Basic equipment CARDIOVIT AT-2 plus Resting ECG with 12 simultaneous leads, pacemaker detection.
Welch Allyn Schiller At 2 Plus
Need to have printout on one paper which will have the demographics then the ecg readings at bottom
0 RepliesWe recently acquired an AT2 plus. We noticed that the measurements all printout however the axis measurement value is blank. Is this not a function of the AT2 plus? If it is a function, what needs to be done to enable the axis to print? Thank you.
4 Replieswhen i press the far left blue button above the green one - manual print - the divice turns off. i disconnected the grey cable that goes to the print head and now the device does not turn off. does this mean, that the printhead is defect?
thanks for an answer.
1 ReplyThe paper is in the machine correctly. Using stop 2x does not bring paper to correct position. It is printing 1' onto next page. How do you get the paper to adjust to correct starting point?
0 Repliesekg paper comes out blank
The user manual posted in the documents is not a user manual for the EKG machine itself.
1 ReplySchiller Cardiovit At-2 Plus User Manual
Dr wants V2 added to report
1 ReplyWe just acquired clinic with these units and we have no servic or operator manuals. All I need right now is button-ology. Date time etc
0 RepliesSchiller At-2 Plus User Manual Guide
Correction I stated the wrong model. This is the Schiller Welch Allyn Cardiovit AT-2 Interpretive EKG machine
The paper cover gear will not engage the drive gear in the main unit properly. This happened after the paper was changed. The paper compartment cover does not seem to fit into the machine properly.
Schiller At2 Plus User Manual
The unit would feed paper for a moment then stop and the paper light would begin flashing. Has this been a common problem with this machine. I was told this machine was recently serviced for a paper feed problem.